Chinee Inflatable Tents
      Chinese   |   English
                Home | About us | Inflatable tents | FAQ | Contact us | Catalog | Client List | Feed Back
Inflatable Tents
» Inflatable tents
» Folding tents
» Travel tents
» ARZ-inflatable tents
» Custom-made tents
» The rounde tents
» Party tents
» Camping tents
» Military tents
» Beach tents
Friend Links
» Tent Information
» Condensation
» Cooking in YourTent
» Fabrics andMaterials
» Key Features
» Practical Hints
» Weights
» Winter Camping


In this section you may find answers to your questions. If not, please send us an email at info@bounce-house.cn and we are happy to help you out.

----------------------------------------------------------------------------

Q. How easy are the tents to inflate and deflate?

A. Very easy. That is one of the biggest single benefits of such inflatable tents: you don’t need to be overly concerned with the poles! Chinee pumps comes with quick disconnect fittings which should plug directly into the Valve Interface on the air beam of the tents. Only about one minute is needed to inflate our largest tent with a foot pump and only about one and a half minutes with an integrated pump! To deflating the tent, you just need to unscrew the large cap on the valve interface. Then you can roll the tent up.

Q. Can Chinee inflatable tents be inflated using compressed air?

A.Yes, of course. But only with a Chinee approved inflation system. One of the fantastic things of Chinee inflatable tents is that they are designed to be functional at low pressures and therefore do not necessarily need heavy pumps or compressed air for inflation. Nevertheless, compressed air systems can be used for extremely rapid deployment, but a regulator or blow-off valve is needed to insure that the pressure do not exceed 9 PSI.

Q. Are the inflatable air beams repairable?

A. Exactly. The broken and/or damaged air beams should be repaired by swapping a new bladder into the air beams, because our air beams have two layers: one is a rugged abrasion resistant outer fabric; the other is an air tight polyurethane inner bladder. At least one bladder access enter has already been made on each air beam. The bladder can be pulled for patching or replacement through the bladder access enter (typically it is a hook and loop flap). Each tent should come with several self-adhesive patches and al least one extra bladder.

Q.Can the air supported tents be used in winter?

A. Yes, they can, but it depends on you. Chinee designs a series of shelters each for a specific application. They are intended to be easier to use and packed with more features than competing three-season tents. The extreme conditions shelters are designed to have all the features you would want in a very cold environment.

Q. What if my tent has a slow leak?

A. Every Chinee tent is carefully and meticulously tested before sent to our customers to insure that there are no leaks and defects. If you have a leak in your tent, it must be in two places: one is in the air beam bladders; the other is in the air beam quick-disconnect valves. So to detect the exact place of the leak, you should remove the bladder from the air beam bladder and inflate it to a modest pressure. Most leaks can be found by passing the inflated bladder along your cheek or the back of your hand and listening carefully. If this does not work, please put the bladder into clean water, and then you can find immediately where the leak is. Then, you can repair the leak by the materials coming with the tent. For more spares, please contact with us.

 

 

 

Phone: 0086-20-85819565 Fax: 0086-20-84044656/83684025 E-mail: info@bounce-house.cn
Office Address: No.610-611,ShunJing Trade Center,No.855, Industrial Avenue South,Guangzhou,China P.C.:510288
Factory Address: Building 5, No.13 Hejing Road, Dongsha Economic & High-tech Zone, Fangcun, Guangzhou, China P.C.: 510385